How To

Filter
faq filter close
Category:
All
ACCESS CONTROL
Cybersecurity
DVR
Hik-Connect & Mobile Apps
HikCentral
IP Camera
IVMS
Legacy
NETWORK CAMERAS
NETWORK PRODUCTS
NVR
NVR & DVR
SOFTWARE
THERMAL PRODUCTS
TRANSMISSION AND DISPLAY PRODUCTS
TURBO HD CAMERA
Tools And Utilities
VIDEO INTERCOM
Video Intercom & Doorbell
    • How-to-Unbind-Device-via-Hik-Connect-APP-V4.2.0-or-above.mp4
  • Using the latest firmware release, DS-K1T671TM-3XF can send email notifications directly from the terminal, eliminating the dependency on client software for such feature. This document will guide through the necessary pre-requisites and procedures required to setup email notifications on DS-K1T671TM-3XF.

    Knowledge Base Link: Email Setup on DS-K1T671TM-3XF

    • DS-HD1-3-MP-Outdoor-Wi-Fi-Smart-Doorbell-Camera---Unboxing-and-Installation.mp4
    • DS-HD1-3-MP-Outdoor-Wi-Fi-Smart-Doorbell-Camera---Install-Hik-Connect-App-and-AddConfigure-Device.mp4
    • DS-HD1-3-MP-Outdoor-Wi-Fi-Smart-Doorbell-Camera---Operation-and-Incident-Sharing.mp4
    • How-To-Enable-a-Privacy-Mask-Through-a-DVR-or-NVR.mp4
    • Upgrading-the-Firmware-on-the-Hikvision-DVR-and-NVR.mp4
    • Solar-Power-Camera-Kit-Installation.mp4
    • How-To-Add-a-User-To-a-Hikvision-Camera.mp4
    • Building-Information-Modeling-with-Hikvision-Video-Surveillance-Equipment.mp4
    • How-to-Set-Up-E-Mail-Notification-on-Hikvision-Cameras.mp4
    • How-To-Open-A-Web-Page-In-Windows-10.mp4
    • How-To-Default-a-Hikvision-Camera.mp4
    • Upgrading-the-Firmware-on-the-Hikvision-IP-Camera.mp4
    • How-to-Set-up-Hik-Connect-Function-in-iVMS-4200.mp4
    • How-Does-Access-Control-Device-Work-on-HikCentral-Pro.mp4
    • How-to-Manage-Person-List-on-HikCentral-Pro.mp4
    • How-to-Set-Emergency-Operation-Group-on-HikCentral-Pro-V1-6.mp4
    • How-Does-Time-&-Attendance-Work-on-HikCentral-Pro.mp4
    • How-Does-Video-Intercom-Device-Work-on-HikCentral-Pro.mp4
    • How-to-install-HikCentral-Pro-server.mp4
    • How-to-Check-Live-Video-on-HikCentral-Pro.mp4
    • How-Does-Visual-Tracking-Work-on-HikCentral-Pro.mp4
    • How-to-Play-Video-Files-on-HikCentral-Pro.mp4
    • How-Does-Event-&-Alarm-Work-on-HikCentral-Pro.mp4
    • How-to-Set-Smart-Wall-with-Decoder-on-HikCentral-Pro.mp4
    • How-Does-User-&-Role-Work-on-HikCentral-Pro.mp4
    • How-Does-Health-Monitoring-Work-on-HikCentral-Pro.mp4
    • How-to-unbind-device-via-SADP-tool.mp4
    • How-to-Activate-a-Hikvision-Camera-Using-SADP.mp4
    • Cybersecurity-&-Video-Surveillance-How-to-Protect-Your-IP-Video-Network.mp4
  • There are two ways to trigger alarm output of indoor station:

    1. Zone alarm :when zone alarm is detected, it will trigger alarm output of indoor station

    2. Calling linkage: when door station or other indoor station calls indoor station, it will trigger alarm output 

  • 1. Add Devices on iVMS-4200

    2. Batch register Indoor station to Door station

  • 1. Add Devices on iVMS-4200

    2. Add Indoor Station to Door Station

    3. Configure the Second lock on the Door Station

  • 1) Set LAN IP

    2) Set WLAN IP

    3) Login camera via WLAN

  • Preparation:

    1. Second generation AcuSense camera (-SL models).

    2. Custom audio with .wav format sampling rate as 8 KHz. 

  • 1. Install TF card 

    2. Format TF card

    3. Set up the schedule 

    4. View Videos 

  • Preparation :

    SDKdemo tool downloaded from Hikvision Homepage

  • Preparation:

    1. Wi-Fi router, mobile phone

    2. Power up camera and waiting for the indicator light of camera quick flash blue

  • The newly added Video Quality Diagnosis function in Basic Event supports 15 kinds of video quality detection functions which are Brightness Exception, Color Cast, Snow Interference, Stripe Interference, Image Freeze, Signal Loss, Clarity Exception, Image Flutter, Video Tampering, Blurred Screen, Image Noise, Light Spot, Image Purple Edge, ICR Exception, Protective Film Unremoved detection. 

    Each diagnosis function separately supports the setting of rules, linkage method and arming schedule. 

  • Preparation:

    1. DS-2CD21x5G0-IMS.

    2. Screw Driver x 1.

    3. Displayer with HDMI input.

    4. HDMI cable.

    5. HDMI switch cable (Type D-to-Type A).

  • 1. Enter the Heat Map configuration interface: Configuration > Heat Map Configuration 2. Check the checkbox of Enable Heat Map to enable the function. 

    3. Click Draw Area to define the area you want to count the visitors.

    4. Set the Max. Size and Min.

    5. Configure the parameters of Heat Map.

    6. Go to Arming Schedule tab, and click-and-drag the mouse on the time bar to set the arming schedule.

    7. Go to Linkage Method tab, and select the linkage method by checking the checkbox of notify the surveillance center.

     

  • 1. Installation of 26xx series bullet camera junction box

    2. Installation of 27xx series dome junction box

    3. Installation of 2Hxx series bullet junction box

  • 1. Configure video stream

    2. Get stream on Firefox or Chrome

  • 1. Min. Focus Distance  2. Lens Initialization  3. Preset   4. Patrol   5. Pattern

    6. Limit   7. Park Action 8. Scheduled Tasks    9. Smart Tracking   10. Rapid Focus

  • 1. Set multicast address

    2. Set live view protocol

    3. Start Live View

  • Camera Installation Requirements

    1. The height of the camera needs to be in the range of 2.5 m to 6 m.

    2. The tilt angle of the camera is recommended to be in the range of 25° to 60°.

    3. The best detection area is within 6 m of the horizontal distance from the camera. 

  • 1. Go to [configuration]-[Network]-[Advanced Settings]-[Integration Protocol], check the checkbox of Enable ONVIF 

    2. Click Add to create ONVIF user

    3. Create ONVIF user and use this username and password to login camera via ONVIF protocol

  • Camera Installation Requirements

    1. The height of the camera needs to be in the range of 2.5 m to 6 m.

    2. The tilt angle of the camera is recommended to be in the range of 25° to 60°.

    3. The best detection area is within 6 m of the horizontal distance from the camera. 

  • Heat map is a graphical representation of data represented by colors. The heat map function is usually used to analyze the visit times and dwell time of customers in a configured area.  

  • Preparation:

    1. Second generation AcuSense camera (-SL models).

    2. Custom audio with .wav format sampling rate as 8 KHz. 

  • Hik-Connect app should be V4.3 or above. Supported device: Hikvision DVRs and NVRs. This function may vary according to the device model and current firmware version.

    1. The device has been added to your Hik-Connect account.

    2. Login the account that the device has been bound to.

    3. The device do not need to become Hik-Connect online.

  • 1. Open Me->Tools->Search for Important Firmware Update.

    2. Currently, the Hik-ProConnect APP supports two methods search for the device affected by security vulnerabilities. 

    3. If there is firmware to be upgraded, the device model and security firmware version will be prompted.

  • Hik-Connect is able to provide DDNS service for devices, through DONS cameras can be added to backend devices and use normal functions, such as live view, playback, recording.

  • The full name of Hik-Connect DDNS is Hik-Connect Dynamic Domain Name Service. Once a device is added to a Hik-Connect account, the Hik-Connect DDNS server will allocate the device serial number as the default Hik-Connect domain name. Customer can edit the domain name later via Hik-Connect APP or web portal. Hik-Connect DDNS provides a mapping relationship between a domain and the device external IP & ports. 

  • 1) Connect DS-K1201MF fingerprint reader to DS-K2600 access controller;

    2) Add fingerprint in iVMS-4200;

    3) Card management;

    4) Advanced function configuration;

    5) Synchronize permission to device;

    6) Swipe card and verify fingerprint

  • 1) Set reader dip switch as wiegand mode.

    2) Connect DS-K2600 controller to RS485 reader

    3) Check reader LED status

  • In this document, the access controller includes DS-K2600 series and DS-K2800 series access controllers.

  • This document displays guidance on how to enable advertisement mode in MinMoe access control terminal.

  • This document displays guidance on how to configure QR code in IVMS4200 software and open door with it on MinMoe access control terminal.

  • This document displays guidance on how to configure the required advertisement picture for MinMoe access control terminal in the web of this device with its IP.

  • This document displays guidance on how to call Hik-Connect mobile app from MinMoe access control terminal. 

  • This document displays guidance on how to configure PIN Code in IVMS4200 software and open door with it on MinMoe access control terminal

  • 1) Set reader dip switch for RS485 address.

    2) Connect DS-K2600 controller to RS485 reader

    3) Check reader LED status

  • This document is simply used to guide users how to wire correctly and ensure access controllers can control locks. The access controller model in this document is DS-K2604. Part 1 is mainly for magnetic lock wiring, and Part 2 and Part 3 are mainly for the situation that users could get the door status on iVMS-4200 Client.

  • 1) Connect DS-K1201MF fingerprint reader to DS-K2600 access controller;

    2) Add fingerprint in iVMS-4200;

    3) Card management;

    4) Advanced function configuration;

    5) Synchronize permission to device;

    6) Verify fingerprint. 

  • Connecting card reader to access controller is mainly applied to swiping card to open the door for entrring or exiting. 

  • Preparation:

    1. The card enrollment station includes DS-K1F100-D8E and DS-K1F180-D8E;

    2. Please download the iVMS-4200 Client on Hikvision official website; http://www.hikvision.com/en/Tools_84.html

    Notice:

    1. In this document, we use DS-K1F100-D8E card enrollment station;

    2. In this document, we use V2.7.0.6 iVMS-4200 Client;

  • 1. Access Control Devices 2600 series

    2. RS485 Card reader DS-K1108MK

    3. Card issuer DS-K1F100-D8

    4. iVMS4200 v3.2.0.10

  • In this document, the card enrollment station includes DS-K1F100-D8E and DS-K1F180-D8E; Make sure you have already got the V2.1.0 firmware and USB Demo for card enrollment station.

  • If the model of access control terminal is DS-K1T105E/E-C or DS-K1T200EF/EF-C, we suggest customers should match the following several card readers, such as DS-K1102E/EK, DS-K1107E/EK and DS-K1108E/EK; you can find the same symbol ‘E’ in the access control terminal and card reader model name, that means both devices can recognize the EM Card. The ‘M’ access control terminal should be matched the ‘M’ card reader either, and they can recognize the Mifare1 Card. 

  • Connecting electric lock to access control terminal is mainly applied to open the door for exiting. 

  • Connecting fingerprint card reader to access controll is mainly applied to swiping card or fingerprints to open the door for entering and exiting. 

  • 1) Power on DS-K2600 controller

    2) Connect controller to door sensor cable

  • DS-K2600 series access controller can open all its doors when fire alarm signal triggers. Also, we can link other linkage actions such as buzzer or alarm output for fire alarm reactcion. Note: Controller’s power supply must be cut off when doing all the hardware wiring steps.

  • 1) Add device to client software

    2) User management(Organization management)

    3) Apply permission to device

  • Operation Process:

    1) Power on DS-K2600 controller

    2) Connect controller to lock

  • 1) Power on DS-K2600 controller and connect lock to DS-K2600 controller

    2) Connect fire alarm signal to controller

  • Preparation: DS-K1T201 One secure module DS-K2M060

    Note: Please cut off power supply before wiring and setting the DIP switch ;

  • Connecting magnetic lock to access controller is mainly applied to swiping card to open the door for exiting.

  • 1) Add device to client software

    2) User management(Organization management)

    3) Apply permission to device

    4) Add authentication password

    5) Change reader verify mode 6) Test

  • 1) What is Interlock function

    2) Interlock configuration

    3) Test

  • Preparation:

    1. The card enrollment station includes DS-K1F100-D8E and DS-K1F180-D8E;

    2. Please download the iVMS-4200 Client on Hikvision official website; http://www.hikvision.com/en/Tools_84.html

    Notice:

    1. In this document, we use DS-K1F100-D8E card enrollment station;

    2. In this document, we use V2.7.0.6 iVMS-4200 Client;

  • Connect card reader to access controller is mainly applied to swiping card to open the door for entrring or exiting. 

  • Hikvision keyboard DS-1005KI support USB connection to computer and control over client software iVMS-4200. This document is intended to show the steps of how to use 1005KI with iVMS-4200. 

  • When you look at this document, please understand the difference between the two versions first.

    Firmware version is the program version .To upgrade the firmware version, you need to use the .apk file to upgrade.

    System version is the keyboard operating system version. To upgrade it you need to use special update package.

    Please note that this document is written specifically for how to upgrade the system version. 

  • As for RAID 5, if one HDD is broken, the RAID5 will be in degraded mode, and we can rebuild RAID5 to recover data. If there are two HDDs broken, the RAID5 will be offline. 

  • NVR which supports NFS/iSCSI protocol can add up to 8 * 8T Net HDD including IPSAN or NAS.

    Note: This function can be configured in website and local GUI.

  • The HDD Clone function can be used to copy the hard disk of NVR and back up the hard disk data of NVR. You need to log on NVR local GUI, then go to the Maintenance-HDD OperationHDD to configure.

  • The customer may have the request to save the video record backup.

    Note: This function need more than two hard disks and the redundancy must be used in group mode. 

  • Please use the enterprise-class HDDs in HDD Compatible List for RAID function

  • Currently there are two ways to connect NVR with POS terminals, via network or via serial port. For example: The NVR initiates the connection to the POS server for the POS data communications between POS server camera. 

  • Custom protocol is created by users with RTSP and 554 port. Then, IP cameras can be added to NVR by custom protocol to get naked stream. Note: As for Hikvision cameras, the stream paths are as below. It is enough to fill in one kind of them. 

  • 1. Key Step 1---Enable the Ultra HD Resolution Mode

    2. Key Step 2---Follow the normal way of adding cameras to add the Ultra HD Resolution multi-track streams IP Camera

  • For NVR models which have independent output interface, if main output and auxiliary output have the different live view configuration. Even if auxiliary output don’t connect to screen, it will also waste some decoding ability of NVR.  

  • N+1 hot spare function is used for backup NVR. The maximum of ‘N’ is 32.

    Note: This function is now supported by DS-9600NI-I series and DS-96000NI-I series NVR.

  • The function of HTTPS ensures the secure access of web services by adding digital signature certificate authentication. All series of NVRs support HTTPS function. This article takes k series NVR (DS-7608NI-K2 v4.30.061 build 210313) as an example to introduce how to use HTTPS function.

  • The smart playback function provides an easy way to get through the less effective information. When you select the smart playback mode, the system will analyze the video containing the motion or VCA information. It will mark it with red color and play it in normal speed, while the video without motion will be played in the 16-time speed(the speed function can be configurable, -E/-Q is not supported). The smart playback rules and areas are configurable.

    Note: This speed function is now supported by almost all -K/-I/-super I series NVR.

  • Preparation :

    1. Camera: DS-2CE16H0T-ITFS

    2. DVR: DS-7216HUHI-K2(S)

  • Preparation:

    1. DVR, Analog camera

    2. Waterproof tape, HDD, VGA cable, Coaxial cables, Monitor

  • Preparation:

    Turbo HD Cameras which belong to HxT series or UxT series can change the resolution of live view in camera OSD menu.

    1. Camera: DS-2CE16H0T-ITFS

    2. DVR: DS-7216HUHI-K2(S)

  • Preparation

    1. POC DVR: The end of model is /P. POC camera: The end of model is E

    2. Waterproof tape, HDD, HDMI/VGA cable, BNC cables, Network cables, Monitor, 

  • Preparation :

    1. Camera mode: DS-2CE12DFT-PIRXOF

    2. DVR mode: DS-7216HUHI-K2 4.21.000 build190722

  • 1. Make sure VCA Resource Type has been selected with Fire Detection option.

    2. Make sure Fire Point info are enabled.

    3.1 Fire Source Detection Basic Settings.

    3.2 Smoke Detection Basic Settings.

    4.1 Check the detected Fire source effect in live view.

    4.2 Check the detected smoke effect in live view.

  •  1. Make sure VCA Resource Type has been selected with Temperature Measurement option as default.

    2. Make sure Display Temperature info option are enabled.

    3. Temperature measurement basic settings. Check the checkbox to enable temperature Measurement function.

    4. Temperature measurement normal mode

    5. Temperature measurement expert mode---Temperature Rule.

    6. Temperature measurement expert mode---Alarm Rule

  • 1. Make sure VCA Resource Type has been selected with Behavior Analysis option as default.

    2. Make sure Rules are enabled.

    3. VCA Basic Settings. 

    4. VCA Rule Settings. 

    5. Shield Region settings.

     

    •  In this case, camera model is DS-2CE10DF0T-PF
    •  DVR model is DS-7208HTHI-K2 4.21.000 build190722 ;DS-7108HGHI-F1 3.4.891build190121 
  • 1. Open the waterproof cap of the switch button. 

    2. Press and hold the switch button. 5s later, the image will be no video because the camera is rebooting and do not loosen the button when the camera is rebooting.

    3. Wait 2s after the image is stable again and then loosen the button (Do not loosen the button as soon as the image is normal). 

  • People Counting is used to calculate the number of people entered or left a certain configured area and form in daily/weekly/monthly/annual reports for analysis. 

  • This document guide user to recover the password on DVR on local GUI.

  • 1. Connect DVR and Analog PTZ Camera

    2. Parameters Configuration

    3. Configuration test

  • To meet customers’ requirement for connecting analog and IP cameras in different rate, Hikvision Turbo HD DVR provide the function of disabling analog channels to expand IP channels. This document is mainly to introduce how to achieve this function.

    Note: 1. Different series device have different abilities of expanding IP channels. You can refer to the file for more details. 2. Disabling one analog channel can expand one IP channels.  

  • To use POS function, both DVR and POS server should be configured and you can configure DVR locally or via iVMS-4200.

  • To use POS function, both DVR and POS server should be configured and you can configure DVR locally or via iVMS-4200.

  • Heat map is a graphical representation of data represented by colors. The heat map function is usually used to analyze the visit times and dwell time of customers in a configured area.  

  • An internet connected device (camera, DVR, NVR) can be configured to be accessed from outside its local network. Using an IP address allocated by the internet provider, the end user is able to connect to this device. Internet services for non-enterprise solutions commonly provide a dynamic IP address to its users. The lack of a static IP address means the user must reconfigure their device connection settings every time a new IP address is allocated. Managing multiple devices will prove difficult if IP addresses are constantly changing. This issue can be solved by using a Dynamic Domain Name System (DDNS) Service. A fixed address is assigned by the DDNS service provider that can be used to connect to the desired device. The device itself must be configured with the DDNS credentials so that it may automatically update the service with the newly allocated IP address. Through this service, devices under dynamic IP addresses can maintain static addresses. Hikvision products support a number of third party DDNS services in addition to HiDDNS/Hik-Connect. 

  • Preparation :

    1. NVR, IP camera

    2. Memory card, waterproof tape, HDD, HDMI cable, Network cables, Monitor, Switch

  • Preparation

    1. Wi-Fi kit or Wi-Fi NVR, Wi-Fi camera

    2. Memory card, waterproof tape, HDD, HDMI cable, Network cables, Monitor 

  • Preparation

    1. PoE NVR, IP camera

    2. Memory card, waterproof tape, HDD, HDMI cable, Network cables, Monitor. 

no result

No matches found.

Please check for errors or try new keywords.

Hikvision.com uses strictly necessary cookies and related technologies to enable the website to function. With your consent, we would also like to use cookies to observe and analyse traffic levels and other metrics / show you targeted advertising / show you advertising on the basis of your location / tailor our website's content. For more information on cookie practices please refer to our cookie policy.

 

Contact Us
back to top